Table of Contents

Home tmade.de

Home Wiki

Pacemaker

See also:

http://clusterlabs.org/doc/en-US/Pacemaker/1.1/html/Pacemaker_Explained/

Installation

Required packages (for SLES 11 SP2):

libpacemaker-devel
libpacemaker3 
pacemaker
pacemaker-mgmt
pacemaker-mgmt-client
pacemaker-mgmt-devel
xorg-x11-fonts
xorg-x11-fonts-core
xorg-x11-libXau
xorg-x11-libXau-32bit
xorg-x11-xauth

Installation for Ubuntu Server 12.04, 16.04, 18.04:

apt-get install pacemaker

Installation for SLES12:

zypper in pacemaker

After pacemaker-installation:

corosync-keygen                          #Create "authkey" (has to be executed in local console!!)
/etc/corosync/authkey                    #Copy "authkey" to other nodes

Useful commands

The following commands can be used to configure and manage pacemaker.

crm configure show                                       #Show resource configuration
crm resource list                                        #Show configured resources
crm_verify -L                                            #Verify resource configuration
crm_mon –i 2                                             #Show resource configuration with update (interval of 2 seconds)
crm_mon -r -1                                            #Show resource configuration
crm_mon -1                                               #Show all resources (one shot)
crm_mon -1nfV
crm configure property no-quorum-policy=ignore           #Ignore quorum 
crm configure property stonith-enabled=false             #Deactivate stonith (shoot the other node in the head) 
crm configure rsc_defaults resource-stickiness=100       #Set default-quantifier to "100"
crm_resource -D -r Apache2 -t primitive                  #delete resource "Apache2"
crm resource cleanup Apache2                             #Clean resource "Apache2" (orphaned or with errors)
crm configure delete Apache                              #Delete resource "Apache". Note: Primitive resources has to been deleted _before_ the group which contains the resource!
crm resource migrate Apache2 node2.site                  #Migrate resource "Apache2" to node2
crm resource unmigrate Apache2                           #Unmigrate resource "Apache2" (set "weight" to default)
crm resource stop Apache2                                #Stopping resource "Apache2"
crm resource start Apache2                               #Starting resource "Apache2"
cibadmin -E --force                                      #Delete complete configuration. Before resources will be deleted, it´s recommended to stop them before ("crm resource stop resource_name"), to avoid deleting "orphaned resources"!
cibadmin -U -x /var/lib/heartbeat/crm/Apache.xml         #Add/ update complete configuration
crm configure primitive failover-ip ocf:heartbeat:IPaddr params ip=192.168.1.10 op monitor interval=10s   
crm_node -R nodex                                        #Remove node "nodex"
crm_node -p                                              #Show nodes in cluster
crm node status                                          #show attributes
crm node list                                            #show status
crm node maintenance NODENAME                            #set maintenance
crm node ready NODENAME                                  #remove from maintenance
crm node online NODENAME                                 #Set the standby node
crmadmin -D                                              #Show current DC
crm ra list stonith
crm ra list lsb
crm_simulate -sL                                         #show live scores

Configure Cluster:

crm configure load update crm-bs.txt                     #load properties

Example crm-bs.txt:

# enter the following to crm-bs.txt
property $id="cib-bootstrap-options" \
no-quorum-policy="ignore" \
stonith-enabled="true" \
stonith-action="reboot" \
stonith-timeout="150s"
rsc_defaults $id="rsc-options" \
resource-stickiness="1000" \
migration-threshold="5000"
op_defaults $id="op-options" \
timeout="600"

Delete cluster property:

crm configure
crm(live/a4t181)configure# delete cib-bootstrap-options

Configure with “crm configure”:

crm configure property stonith-enabled=false no-quorum-policy=ignore cluster-infrastructure=corosync have-watchdog=false cluster-name=lbcluster
crm configure primitive vIP1-0 ocf:heartbeat:IPaddr2 \
params ip="10.251.49.50" nic="eth0" cidr_netmask="25" \
op monitor interval="10s" timeout="20s"
crm configure primitive ping-gateway ocf:pacemaker:ping \
        meta target-role="Started" \
        op monitor interval="10" timeout="60" \
		params host_list="10.251.49.1" multiplier="1000" timeout="20"
crm configure clone pingclone ping-gateway \
        meta target-role="Started"	
crm configure location vIP1-0_cons vIP1-0 200: myhostname
crm configure rsc_defaults rsc-options: \
        resource-stickiness=1000 \
        migration-threshold=5000
crm configure op_defaults op-options: \
        timeout=600

Restart:

systemctl stop pacemaker.service && systemctl stop corosync.service
systemctl stop pacemaker.service && systemctl restart corosync.service && systemctl start pacemaker.service

Change parameter:

cibadmin -Q | grep ip

Output:

<nvpair id="vIP1-0-instance_attributes-ip" name="ip" value="192.168.1.5"/>

To change e.g. the IP execute:

cibadmin -M --crm_xml '<nvpair id="vIP1-0-instance_attributes-ip" name="ip" value="192.168.1.66"/>'
cibadmin -M --xml-text '<nvpair id="cib-bootstrap-options-cluster-name" name="cluster-name" value="lbcluster"/>'

Stonith

See the list of stonith devices:

stonith -L

https://clusterlabs.org/pacemaker/doc/en-US/Pacemaker/1.1/html/Pacemaker_Explained/s-cluster-options.html

Configuration

Path:

/usr/lib/ocf/resource.d/heartbeat/                           #OCF-Init-Scripts
/etc/corosync/corosync.conf                                  #Configuration
/var/lib/heartbeat/crm/cib.xml                               #"Last" updated resource configuration file on SLES 11/ Ubuntu Server 12.04
/var/lib/pacemaker/cib/cib.xml                               #"Last" updated resource configuration file on Ubuntu Server 14.04, SLES 12
/etc/init.d/openais                                          #Service init-script to start/stop pacemaker on SLES 11
/etc/init.d/corosync                                         #Service init-script to start/stop pacemaker on Ubuntu Server 12.04 (previously edit "/etc/default/corosync": # start corosync at boot [yes|no] -> START=yes)

SLES11

Example “/etc/corosync/corosync.conf” (SLES 11):

aisexec {
	group:	root
	user:	root
}
service {
	use_mgmtd:	no
	ver:	0
	name:	pacemaker
}
totem {
	rrp_mode:	passive
	token_retransmits_before_loss_const:	10
	join:	60
	max_messages:	20
	vsftype:	none
	token:	5000
	consensus:	6000
	secauth:	on
	version:	2
	threads:	0
	transport:	udpu
	interface {
		#Pacemaker nodes:
                member {
                        #Load-Balancer1
                        #memberaddr:    10.0.0.193
                        memberaddr:     lb_node1                       #DNS for hostname has to be configured
                }
                member {
                        #Load-Balancer2
                        #memberaddr:    10.0.0.194
                        memberaddr:     lb_node2                       #DNS for hostname has to be configured
                }
                #Network:
		bindnetaddr:	10.0.0.0
		mcastport:	5405
		ringnumber:	0
	}
	clear_node_high_bit:	yes
	stonith-enabled=true
}
logging {
	to_logfile:	yes
	to_stderr:	no
	to_syslog:	yes
	debug:	off
	timestamp:	on
	logfile:	/var/log/cluster/corosync.log
	fileline:	off
	syslog_facility:	daemon
}
amf {
	mode:	disable
}

SLES12

Example “/etc/corosync/corosync.conf” (SLES 12):

# Please read the corosync.conf.5 manual page
totem {
        version: 2

        crypto_cipher: none
        crypto_hash: none

        clear_node_high_bit: yes

        interface {
                ringnumber: 0
                bindnetaddr: 192.168.150.0
                mcastport: 5405
                ttl: 1
        }
        transport: udpu
}

logging {
        fileline: off
        #to_logfile: no
        to_syslog: yes
        #logfile: /var/log/cluster/corosync.log
        debug: off
        timestamp: on
        logger_subsys {
                subsys: QUORUM
                debug: off
        }
}

nodelist {
        node {
                ring0_addr: 192.168.150.12
                name: testnode1
                nodeid: 1
        }

        node {
                ring0_addr: 192.168.150.13
                name: testnode1
                nodeid: 2
        }
}

quorum {
        # Enable and configure quorum subsystem (default: off)
        # see also corosync.conf.5 and votequorum.5
        provider: corosync_votequorum
        expected_votes: 2
}

Ubuntu 12.04

Example “/etc/corosync/corosync.conf” (Ubuntu Server 12.4):

# Please read the openais.conf.5 manual page

totem {
        version: 2

        # How long before declaring a token lost (ms)
        token: 3000

        # How many token retransmits before forming a new configuration
        token_retransmits_before_loss_const: 10

        # How long to wait for join messages in the membership protocol (ms)
        join: 60

        # How long to wait for consensus to be achieved before starting a new round of membership configuration (ms)
        consensus: 3600

        # Turn off the virtual synchrony filter
        vsftype: none

        # Number of messages that may be sent by one processor on receipt of the token
        max_messages: 20

        # Limit generated nodeids to 31-bits (positive signed integers)
        clear_node_high_bit: yes

        # Disable encryption
        #secauth: off
        secauth: on

        # How many threads to use for encryption/decryption
        threads: 0

        # Optionally assign a fixed node id (integer)
        # nodeid: 1234

        # This specifies the mode of redundant ring, which may be none, active, or passive.
        rrp_mode: none

#       interface {
#               # The following values need to be set based on your environment
#               ringnumber: 0
                #bindnetaddr: 127.0.0.1
#               bindnetaddr: 192.168.0.203
#               mcastaddr: 226.94.1.1
#               mcastport: 5405
#       }
        interface {
                member {
                        memberaddr: 192.168.0.201
                }
                member {
                        memberaddr: 192.168.0.203
                }

                ringnumber: 0
                bindnetaddr: 192.168.0.0
                mcastport: 5405
                ttl: 1
        }
        transport: udpu


}

amf {
        mode: disabled
}

service {
        # Load the Pacemaker Cluster Resource Manager
        ver:       0
        name:      pacemaker
}

aisexec {
        user:   root
        group:  root
}

logging {
        fileline: off
        to_stderr: yes
        to_logfile: no
        to_syslog: yes
        syslog_facility: daemon
        debug: off
        timestamp: on
        logger_subsys {
                subsys: AMF
                debug: off
                tags: enter|leave|trace1|trace2|trace3|trace4|trace6
        }
}

Ubuntu 16.04

totem {
  version: 2
  cluster_name: lbcluster
  transport: udpu
  interface {
    ringnumber: 0
    bindnetaddr: 192.168.150.128
    broadcast: yes
    mcastport: 5405
  }
}

quorum {
  provider: corosync_votequorum
  expected_votes: 3
  #two_node: 1
}

nodelist {
  node {
    ring0_addr: 192.168.150.230
    name: node002
    nodeid: 1
  }
  node {
    ring0_addr: 192.168.150.239
    name: node006
    nodeid: 2
  }
  node {
    ring0_addr: 192.168.150.243
    name: node007
    nodeid: 3
  }
}

logging {
  # Log the source file and line where messages are being
  # generated. When in doubt, leave off. Potentially useful for
  # debugging.
  # Log with syslog facility daemon.
  #syslog_facility: daemon
  fileline: off
  to_logfile: yes
  to_stderr: no
  debug: off
  logfile: /var/log/corosync/corosync.log
  to_syslog: yes
  timestamp: on
}

OCF-Ressource

Example ressource-configuration (2 x virtIP, pound, pen):

<cib>
<configuration>
    <crm_config>
      <cluster_property_set id="cib-bootstrap-options">
        <nvpair id="cib-bootstrap-options-expected-quorum-votes" name="expected-quorum-votes" value="2"/>
        <nvpair id="cib-bootstrap-options-no-quorum-policy" name="no-quorum-policy" value="ignore"/>
        <nvpair id="cib-bootstrap-options-stonith-enabled" name="stonith-enabled" value="false"/>
      </cluster_property_set>
    </crm_config>

    <nodes>
        <!-- Node 1 -->
      <node id="lb_node1" type="normal" uname="lb_node1">
        <instance_attributes id="lb_node1">
          <nvpair id="lb_node1-standby" name="standby" value="off"/>
        </instance_attributes>
      </node>
        <!-- Node 2 -->
      <node id="lb_node2" type="normal" uname="lb_node2">
        <instance_attributes id="lb_node2">
          <nvpair id="lb_node2-standby" name="standby" value="off"/>
        </instance_attributes>
      </node>
    </nodes>

    <resources>
        <!--  Cluster 0 (virtIP + pound) -->
      <group id="lb-cluster-1">
        <meta_attributes id="lb-cluster-1-meta_attributes">
          <nvpair id="lb-cluster-1-meta_attributes-target-role" name="target-role" value="Started"/>
        </meta_attributes>

        <!-- virtuelle IP0 -->
         <primitive class="ocf" id="vIP1-0" provider="heartbeat" type="IPaddr2">
          <operations id="vIP1-0-operations">
            <op id="vIP1-0-op-monitor-10s" interval="10s" name="monitor" timeout="20s"/>
          </operations>
          <instance_attributes id="vIP1-0-instance_attributes">
            <nvpair id="vIP1-0-instance_attributes-ip" name="ip" value="10.0.0.190"/>
            <nvpair id="vIP1-0-instance_attributes-cidr_netmask" name="cidr_netmask" value="255.255.255.0"/>
            <nvpair id="vIP1-0-instance_attributes-nic" name="nic" value="eth0"/>
          </instance_attributes>
         </primitive>

        <!-- OCF-File pound -->
         <primitive class="ocf" provider="heartbeat" type="pound" id="lb-pound">
          <operations id="pound-operations">
            <op id="lb-pound-monitor-10s" interval="10s" name="monitor" timeout="20s"/>
          </operations>
         </primitive>
        </group>

        <!-- Cluster 1 (virtIP + pen) -->
         <group id="lb-cluster-2">
        <meta_attributes id="lb-cluster-2-meta_attributes">
          <nvpair id="lb-cluster-2-meta_attributes-target-role" name="target-role" value="Started"/>
        </meta_attributes>

        <!-- virtuelle IP1 -->
         <primitive class="ocf" id="vIP1-1" provider="heartbeat" type="IPaddr2">
          <operations id="vIP1-1-operations">
            <op id="vIP1-1-op-monitor-10s" interval="10s" name="monitor" timeout="20s"/>
          </operations>
          <instance_attributes id="vIP1-1-instance_attributes">
            <nvpair id="vIP1-1-instance_attributes-ip" name="ip" value="10.0.0.188"/>
            <nvpair id="vIP1-1-instance_attributes-cidr_netmask" name="cidr_netmask" value="255.255.255.0"/>
            <nvpair id="vIP1-1-instance_attributes-nic" name="nic" value="eth0"/>
          </instance_attributes>
         </primitive>

        <!-- OCF-Files pen -->
         <primitive class="ocf" provider="heartbeat" type="pen_ocf_80" id="pen_lb_80">
          <operations id="pen_ocf_80-operations">
            <op id="pen_lb_80-monitor-10s" interval="10s" name="monitor" timeout="20s"/>
          </operations>
         </primitive>

         <primitive class="ocf" provider="heartbeat" type="pen_ocf_443" id="pen_lb_443">
          <operations id="pen_ocf_443-operations">
            <op id="pen_lb_443-monitor-10s" interval="10s" name="monitor" timeout="20s"/>
          </operations>
         </primitive>

      </group>

    </resources>

    <constraints>
        <!-- Default-Node to run ressource on -->
        <!-- score = priority ressource -->
      <rsc_location id="lb-cluster-1_cons" node="lb_node1" rsc="lb-cluster-1" score="0"/>
      <rsc_location id="lb-cluster-2_cons" node="lb_node1" rsc="lb-cluster-2" score="200"/>
    </constraints>

    <op_defaults>
    </op_defaults>

    <rsc_defaults>
      <meta_attributes id="rsc_defaults-options">
        <nvpair id="rsc_defaults-options-resource-stickiness" name="resource-stickiness" value="100"/>
      </meta_attributes>
    </rsc_defaults>

  </configuration>
</cib>

Snippets

<constraints>
    <rsc_location id="loc-1" rsc="Webserver" node="sles-1" score="200"/>
    <rsc_location id="loc-2-dont-run" rsc="Webserver" node="sles-2" score="-INFINITY"/>
    <rsc_location id="loc-3-dont-run" rsc="Database" node="sles-1" score="-INFINITY"/>
    <rsc_location id="loc-4" rsc="Database" node="sles-2" score="200"/>
</constraints>


<constraints>
    <rsc_order id="order-1" first="Database" then="Webserver" />
    <rsc_order id="order-2" first="IP" then="Webserver" score="0"/>
</constraints>

Manually Resource Add

To add a resource manually run:

crm configure

To login into “crm(live)configure#”

Afterwards you can add a virtual IP (vIP1-0) by running:

primitive vIP1-1 ocf:heartbeat:IPaddr2 params ip="10.6.3.121" nic="eth0" cidr_netmask="24" operations $id="vIP1-1-operations" op monitor interval="10s" timeout="20s"

To add the new resource “vIP1-1” to group “lb-cluster-2” run:

group lb-cluster-2 vIP1-1 meta target_role=Started
group lb-cluster-group-name resource1 resource2 resource3

Or from shell:

crm configure group lb-cluster-group-name resource1 resource2 resource3

To set constraints for group “lb-cluster-2” with ID “lb-cluster-2_cons” with score “200” to run on host “hostname”:

location lb-cluster-2_cons lb-cluster-2 200: hostname

Stickyness:

crm configure rsc_defaults resource-stickiness=500

To save the changes:

commit

To delete (resource has to be stopped before!) a resource run:

delete resourceID
commit

Example:

root@albano:/etc/corosync# crm configure
crm(live)configure# primitive lb-nginx ocf:heartbeat:nginx operations $id="lb-nginx" op start interval="0" timeout="90s" op stop interval="0" timeout="120s" op monitor interval="10s" timeout="20s"
crm(live)configure# primitive vIP1-1 ocf:heartbeat:IPaddr2 params ip="10.6.3.121" nic="eth0" cidr_netmask="24" operations $id="vIP1-1-operations" op monitor interval="10s" timeout="20s"
crm(live)configure# group lb-cluster-2 vIP1-1 lb-nginx meta target_role=Started
crm(live)configure# location lb-cluster-2_cons lb-cluster-2 200: hostname
crm(live)configure# commit

OCF-Init-Script

Example OCF-Init-Script for “pound” Loadbalancing (/usr/lib/ocf/resource.d/heartbeat/pound):

#!/bin/sh
#
#	Manages Pound as a Linux-HA resource
#
# params:
#   OCF_RESKEY_pound
#	OCF_RESKEY_config
#   OCF_RESKEY_pid
#	OCF_RESKEY_poundctl
#
###############################################################################
# Initialization:

#. /usr/lib/ocf/resource.d/heartbeat/.ocf-shellfuncs
OCF_ROOT=/usr/lib/ocf

: ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat}
. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs

: ${OCF_RESKEY_pound="/usr/local/pound/sbin/pound"}
: ${OCF_RESKEY_pid="/var/run/pound_ocf.pid"}
: ${OCF_RESKEY_config="/etc/pound.cfg"}
: ${OCF_RESKEY_poundctl="/usr/local/pound/sbin/poundctl"}
: ${OCF_RESKEY_socket="/var/run/pound.socket"}
##############################################################################
# helpers:

pound_socket()
{
	grep -i control /etc/pound.cfg | cut -d " " -f2 | sed 's/[\"]//g'
}

pound_pid()
{
	cat $OCF_RESKEY_pid
}

###############################################################################
# interface:

usage()
{
cat <<END
usage: $0 (start|stop|status|monitor|meta-data|validate-all)

$0 manages Pound as an HA resource.

END
}

meta_data()
{
cat <<END
<?xml version="1.0"?> 
<!DOCTYPE resource-agent SYSTEM "ra-api-1.dtd">
<resource-agent name="pound">
  <version>1.0</version>
  <longdesc lang="en">This is an OCF resource agent for the Pound reverse proxy</longdesc>
  <shortdesc lang="en">OCF resource agent for Pound</shortdesc>
  <parameters>
    <parameter name="pound" unique="0" required="0">
      <longdesc lang="en">Path to the Pound executable</longdesc>
      <shortdesc lang="en">Pound executable</shortdesc>
      <!--<content type="string" default="/usr/sbin/pound" />-->
	  <content type="string" default="/usr/local/pound/sbin/pound" />
    </parameter>
    <parameter name="poundctl" unique="0" required="0">
      <longdesc lang="en">Path to the poundctl executable</longdesc>
      <shortdesc lang="en">poundctl executable</shortdesc>
      <!--<content type="string" default="/usr/sbin/poundctl" />-->
	  <content type="string" default="/usr/local/pound/sbin/poundctl" />
    </parameter>
    <parameter name="config" unique="0" required="0">
      <longdesc lang="en">Pound's config file</longdesc>
      <shortdesc lang="en">Pound's config</shortdesc>
          <content type="string" default="/etc/pound/pound.cfg" />
    </parameter>
    <parameter name="pid" unique="0" required="0">
      <longdesc lang="en">Pound's process ID file</longdesc>
      <shortdesc lang="en">Pound's PID</shortdesc>
      <!--<content type="string" default="/var/run/pound.pid" />-->
	  <content type="string" default="/var/run/pound_ocf.pid" />
    </parameter>
  </parameters>
  <actions>
    <action name="start" timeout="60" />
    <action name="stop" timeout="60" />
    <action name="status" timeout="30" />
    <action name="monitor" depth="0" start-delay="10" interval="10" timeout="30" />
    <action name="meta-data" timeout="5" />
    <action name="validate-all" timeout="5" />
 </actions>
</resource-agent>
END
}

pound_validate()
{
	if [ ! -f $OCF_RESKEY_pound ]; then
		ocf_log err "$OCF_RESKEY_pound doesn't exist";
		exit $OCF_ERR_CONFIGURED;
	fi

	if [ ! -x $OCF_RESKEY_pound ]; then
		ocf_log err "$OCF_RESKEY_pound is not executable"
		exit $OCF_ERR_PERM
	fi

	if [ ! -f $OCF_RESKEY_poundctl ]; then
		ocf_log err "$OCF_RESKEY_poundctl doesn't exist";
		exit $OCF_ERR_CONFIGURED;
	fi

	if [ ! -x $OCF_RESKEY_poundctl ]; then
		ocf_log err "$OCF_RESKEY_poundctl is not executable"
		exit $OCF_ERR_PERM
	fi

	if [ ! -f $OCF_RESKEY_config ]; then
		ocf_log err "Config file $OCF_RESKEY_config doesn't exist";
		exit $OCF_ERR_CONFIGURED;
	fi

	msg=`$OCF_RESKEY_pound -c -f $OCF_RESKEY_config 2>&1`
	if [ $? -ne 0 ]; then
		ocf_log err "$msg"
		exit $OCF_ERR_CONFIGURED
	fi

	return $OCF_SUCCESS
}

pound_status()
{
	pound_monitor
}

pound_monitor()
{
	local ret

	if [ ! -f $OCF_RESKEY_pid ]; then
		ocf_log debug "Pound is not running"
		return $OCF_NOT_RUNNING;
	else
		if ! $OCF_RESKEY_poundctl -c `pound_socket` > /dev/null 2>&1; then
			ocf_log debug "Pound is not running"
			[ -f $OCF_RESKEY_pid ] && rm $OCF_RESKEY_pid
			return $OCF_NOT_RUNNING;
		fi

		return $OCF_SUCCESS;
	fi
}

pound_start()
{
	local ret

	pound_monitor
	ret=$?

	if [ $ret -eq $OCF_SUCCESS ]; then
		ocf_log info "Pound is already running (PID: `pound_pid`), doing nothing"
		return $OCF_SUCCESS;
	fi

	$OCF_RESKEY_pound -f $OCF_RESKEY_config -p $OCF_RESKEY_pid > /dev/null 2>&1
	ret=$?

	if [ $ret -ne 0 ]; then
		ocf_log err "Pound failed to start: $ret"
		return $ret;
	fi

# lets rely on start timeout here...
	while ! pound_monitor; do
		sleep 1
	done

	ocf_log info "Pound started successfully (PID: `pound_pid`)"
	return $OCF_SUCCESS;
}

pound_stop()
{
	local ret

	pound_monitor
	ret=$?

	if ! pound_monitor; then
		ocf_log info "Pound stopped successfully";
		return $OCF_SUCCESS;
	fi

	kill -s TERM `pound_pid` > /dev/null 2>&1

	while pound_monitor; do
		sleep 1
	done

	ocf_log info "Pound stopped successfully";
	return $OCF_SUCCESS;
}


case $__OCF_ACTION in
  start)	pound_validate; pound_start;;
  stop)		pound_validate; pound_stop;;
  status)	pound_status;;
  monitor)	pound_monitor;;
  meta-data)	meta_data; exit $OCF_SUCCESS;;
  validate-all)	pound_validate; exit $OCF_SUCCESS;;
  *)		usage; exit $OCF_ERR_UNIMPLEMENTED;;
esac
exit $?